EN
46
FACTORY SETTING?
NO SI
Pressing on “YES”, it is reloaded factory settings
OK
OK
MODE
<PI PRESSURE OK
MODE
PI VOLUME
MODE
PROPORT.
MODE
MIN-MAX
OK
OK
MODE
RTC
MODE
PRTC
MODE
PROP.+RTC
MODE
MIN-MAX+RTC
Operation:
depending on mode selected, displayed parameters will be specifi c to each one. Ending “RTC” modes are only in
combination with programming schedule TIMER RTC accessory.
6.6.3. Operation PI PRESSURE/COP mode
In section 5 we have described that the fan comes from factory ready to work in constant pressure mode. However, it is also
possible to connect an external pressure transducer (0-10V or 4-20mA) that should be connected to J5 or J6 terminals.
Operation PI PRESSURE/COP mode
After selecting the operating PI PRESSURE/COP mode, you can confi gure following parameters:
MIN-OUTPUT
< 20%
OK
Press
or
to manually modify the minimum
output parameter to the motor
MAX-OUTPUT
< 100%
OK
Press
or
to manually modify the maximum
output parameter to the motor
OK
OK
OK
OK
NO
