SanDisk SDIB-4, Product Manual

Page: 23 / 69

FlashDrive Product Manual
FlashDrive Product Manual © 1999 SANDISK CORPORATION 23
4.0 FlashDrive AT Interface Description
4.1 Physical Description
The host is connected to the 1.8- and 2.5-inch
FlashDrives using a standard 44 pin connector
consisting of two rows of 22 male pins on 2 mm (78.7
mils) centers. The header is a DuPont Minitek II,
part number 86455-144, or equivalent. The maximum length cable is 18 inches (45.7 cm). The
host is connected to the 3.5-inch FlashDrive using
a standard 40 pin ATA disk drive interface
connector and standard four pin power connector.
Pin 1
Key
Figure 4-1 1.8- and 2.5-inch Connector
Figure 4-2 3.5-inch Connector