SanDisk SDIB-4, Product Manual

Page: 63 / 69

Ordering Information and Technical Support
FlashDrive Product Manual © 1999 SANDISK CORPORATION 63
Ordering Information
To order SanDisk products directly from SanDisk, call 408-542-0595.
SanDisk FlashDrive
Model SDIBI-X-101 (1.8-inch form factor)
Where: I: Industrial Version
(blank) Standard Version
X: 4 4.03 MB
10 10.48 MB
20 20.97 MB
40 41.94 MB
80 83.88 MB
140 140.77 MB
220 220.2 MB
Model SD25BI-X (2.5-inch form factor)
Where: I: Industrial Version
(blank) Standard Version
X: 20 20.0 MB
40 40.1 MB
60 60.1 MB
80 80.2 MB
100 100.0 MB
220 220.2 MB
350 350.6 MB
440 440.2 MB
Model SD35B-X (3.5-inch form factor)
Where: I: Industrial Version
(blank) Standard Version
X: 20 20.0 MB
40 40.1 MB
60 60.1 MB
80 80.2 MB
100 100.0 MB
220 220.2 MB
350 350.6 MB
440 440.2 MB
Mounting Hardware
Mounting hardware for the FlashDrive can be
obtained from the company listed below. SanDisk
Technical Support can also provide information regarding FlashDrive mounting hardware.
Contact SanDisk Technical Support at
408-542-0405.
Vendor Hardware
Mr. Metric
960 North 10th Street
San Jose, CA 95112
Tel: 408-286-8816
Fax: 408-286-0974 Screws: 1.6mm, M3, 6-32
Standoffs: part number 362001
1.6 x 15 mm female to female
standoffs, aluminum
Olander Company
144 Commercial Street
Sunnyvale, CA 94086
Tel: 1-800-538-1500
Fax: 408-735-6515 Screws: 1.6mm, several types
available
Standoffs: aluminum, nylon,
several types available, made
to order