06
1. Dash Cam Overview
SDDCV-V7
1. Hide the cable connecting camera between front and rear
camera into the top of the vehicle.
2. After removing the film of the double-sided tape on the
cradle of the rear camera, attach the camera on the surface
of the rear window.
3. Remove the film on the lens of the rear camera.
4. Adjust the rear camera at a proper angle.
5. Insert the front/rear camera connection cable to the rear
camera.
6. Attach the double-sided tape to the cradle.
7. Assemble the cradle to be properly fit to the connection
part of the front camera.
8. After moving the film of the double-sided tape attached to
the cradle, attach the cradle on the window surface at
which can be easily done.
Clean any dirt off the window surface before attachment.
Adhesion will be reduced if you attach the cradle again after
removal.
Be careful for the rear window defroster not to be in contact
with the cradle.
Be careful not to leave dirt of fingerprint on the lens when
removing the protection film.
Rear Camera
Connection
Attach the cradle at a place you can easily operate the buttons.
Clean any dirt off the window surface before attachment.
Adhesion will be reduced if you attach the cradle again after
removal.
4) Product Assembly