Sanding STS-750RC Series User Manual Download Page 29

Page: 29 / 152

1) No beep

2) Fast beep

3) Permanent beep

3.3.4 Coding

Codes contain information about recorded points. With the help of coding, points

can be assigned to a particular group simplifying later processing. More
information on coding can be found under “File Management”.

The operational steps of simple coding:

1) Mov

e the cursor to the “Code” column.

2) Input coding name.

3) Press [All] to start distance measure and record the code and measurement

result together. Press Code to search the code entered and modify the attributes.

STEPS

DISPLAY

Turn to Page 3/4 of the measure screen.

【

Measure

】

3/4

PtID

Code

------

R.HT

1.000 m

70°43’23”

Ⅰ

210°36’08”

Mem.

7.235 m

All

CODE

EDM

↓

Input the code.

【

Measure

】

3/4

PtID

Code

BS10

R.HT

1.000 m

70°43’23”

Ⅰ

210°36’08”

Mem.

7.235 m

INSERT

DELETE

CLEAR

NUMBER

Summary of Contents for STS-750RC Series

























































































































































Search results

Summary of Contents for STS-750RC Series

Reviews:

Related manuals for STS-750RC Series

Brands by name

Popular brands

Sanding STS-750RC Series, User Manual

Search results

Summary of Contents for STS-750RC Series

Reviews:

Related manuals for STS-750RC Series

Brands by name

Popular brands