Sanding STS-750RC Series User Manual Download Page 45

Page: 45 / 152

STEPS

DISPLAY

Press F2 to enter to

Setting Station

Press SEARCH, or LIST to find an

existed (known) point from internal

memory.

Or press ENH to input the PtID and its

coordinates and save it in the job.

【

Setting Station

】

Input Station PtID!

StnPt

OCC1

LIST

ENH

Enter the instrument height, and press

OK to save the station setting.

【

Setting Station

】

Input INS.HT!

INS.Ht

2.000m

PtID

5.3 SETTING ORIENTATION

With the orientation, Hz-direction can be input manually or set by points with

known coordinates can be set.

5.3.1 Manually Inputting

STEPS:

1) Press F1 to input a random HZ-orientation.

2) Input Hz-direction, reflector height and PtID.

3) Press All to start measurement and set orientation. Or press RECORD to

record HZ-direction and set orientation.

STEPS

DISPLAY

Press F3 to enter to

Set Orientation

Press F1 to set the orientation manually.

【

Orientation

】

F1 Set manually

F2 Known Point

Summary of Contents for STS-750RC Series

























































































































































Search results

Summary of Contents for STS-750RC Series

Reviews:

Related manuals for STS-750RC Series

Brands by name

Popular brands

Sanding STS-750RC Series, User Manual

Search results

Summary of Contents for STS-750RC Series

Reviews:

Related manuals for STS-750RC Series

Brands by name

Popular brands