Instructions for the installer, maintenance
technician and final user
Page 43 of 54
© SandenVendo Europe SpA
5.2 Recommended cleaning products
We recommend cleaning the machine using only the following types of products and
materials:
neutral detergent
compressed air (2 bar max.)
Attention!
In order to avoid any oxidization, corrosion, brattling, peeling of paint and other damages to
the machine
NEVER USE
under any circumstance the following products::
abrasive detergents
very alkaline or acidic detergents
benzene
petrol
acetone
5.3 Cleaning safety devices
For each cleaning operation, it is advisable to wear protective gloves and/or clothing.
Attention!
Follow all cleaning product instructions and read the relevant COSHH data.
5.4 Preventive maintenance
To guarantee the machine operates correctly we recommend that you periodically carry out
the following maintenance operations:
Check the vending machine and the surrounding area, check for signs of rust on the
outer cabinet and obstructions in the air vents.
Open the door and check there is no accumulation of water, signs of rust, and humidity
around the corners.
Check that the evaporator outlet is not blocked (condensed water in the evaporator must
drain out towards the condenser pan).
Periodically check the door seals. Should they be damaged, replace the seals
immediately.
Periodically check that the condenser is clean.
Check that the evaporator fan and the cooling system work normally (the fan blades must
be free from any foreign mater).
Check that the compressor and the condenser fan work normally (the fan blades must be
free from any foreign matter).
Check that all the selections are correctly delivered.
Periodically check the service cord. If the cable or connector is damaged or worn, it must
be replaced with a service cord of the same type as the original delivered together with the
vending machine.
