Instructions for the installer, maintenance
technician and final user
Page 18 of 54
© SandenVendo Europe SpA
3 TRANSPORT, STORAGE AND INSTALLATION
3.1 Transport and Storage
Unloading from the vehicles of transport and handling of the vending machine must be carried
out only by competent personnel and with the use of suitable
equipment’s for the load to be
handled.
The vending machine is positioned above two wooden bases, protected by a bag, by four
corners and by a retractable film.
Use a forklift, power-driven or manual, to unload the vending machine from the vehicles of
transport, the wooden bases allow the sockets on the 4 sides of the vending machine.
Attention!
It is forbidden to transport and / or place the vending machine in a horizontal position;
It is forbidden to drag or lift the vending machine with ropes, slings or other;
Avoid maneuvers that can cause sudden jolts and impacts to the vending machine.
In the event the machine is
mistakenly laid horizontally
, place in the upright position
and
wait at least 12 hours
before switching on; otherwise, damage may be caused to the
cooling system.
If the vending machine is not used immediately or is stored for long periods, check that
it is correctly packaged and positioned vertically.
Storage must be carried out in closed but well ventilated
places that do not have particular harmful characteristics to
the machine components, especially the electronic ones. It is
necessary that the environment is dry and with temperatures
not lower than 1°C.
Protect the unpainted parts from corrosion with suitable
greases or sprays; if necessary, stow it with dehydrating salts.
i
As long as the vending machine has the original
packaging, including wooden bases, it is possible
to overlap two.
Attention!
Unpacked vending machines are not stackable.
MODEL
A
(mm)
B
(mm)
C
(mm)
GROSS WEIGHT
(Kg)
C36
1960
665
810
300
C47
1960
765
965
320
C48
1960
865
965
360
C4X
1960
1030
965
395
C
A
B
