Instructions for the installer, maintenance
technician and final user
22
© SandenVendo Europe SpA
5.1.2 Charging
This mechanism can vend some packages stacked in double depth (
2D
column) (ref. Fig
5.7) and other in single depth (
1D
column) (ref. Fig 5.2)
2D
1D
FIG.5.2 – EXAMPLE OF CHARGING
5.1.3 Conversion from 1D to 2D and from 2D to 1D
If conversions are necessary, refer to the instructions below:
1) Remove the mechanism cover
2) Power the vending machine
3) Enter the board-programming mode (refer to the programming manual), using “Test”
function, start the motor of the column to be converted. This will cause the rotation of
the cam, which will be rotated until the link assembly (
C
) connected to the cam (
D
) will
be in its lower position showing the two mounting screws (
E
) the cam cover (rif. Fig.
5.3).
FIG.5.3 – VEND MOTOR
4) Disconnect power to the vending machine
5) Loosing the two mounting screws (
E
) of the cam cover (
F
) and turn it as much as
possible counter clockwise to convert from
2D
to
1D
(ref. Fig 5.4) or clockwise to
convert from
1D
to
2D
tighten screws again.