Instructions for the installer, maintenance
technician and final user
19
© SandenVendo Europe SpA
3.8 Control settings
All the machine’s control and operation settings can be set through the programming
routine of the electronic board.
The programming routine of the electronic board is described in the PROGRAMMING
MANUAL supplied with the vending machine.
i
REFER TO THE PROGRAMMING MANUAL
3.9 Price setting
For
setting
price
refer
to
the
programming manual of the control
board. This vending machine allows you
to use different prices for each single
selection and to make any kind of pairing
between column and selection button.
Fig. 3.5
i
SANDENVENDO ALWAYS SUPPLIES VENDING MACHINE WITH ALL THE
SELECTION SET ON SAME PRICE AND WITH COLUMNS PAIRED AS
FOLLOWS
3.10 Label installation
Unscrew the screw from the coin mechanism door,
open it and install the label (
U
) from the top of
each window (
T
) inserting them between the two
plastic parts. Remember that the first part
remember that the first button on the top actuates
the first column on the right and so on up to the
last button on the bottom that actuates the last
column on the left.
Close the coin mechanism door.
Fig. 3.6
