BankGuard PLUS
S&C Electric Company
Control
Proprietary Information
2
Operation
1011-540 5-17-04
Instruction Sheets Include:
Product Description
1011-500 explains important product features.
Installation
1011-510 describes how to install and connect the
BankGuard PLUS Control.
Setup
1011-530 describes how to use the Setup software to
configure the BankGuard PLUS Control, check the
present settings, and view real-time data.
Operations
1011-540 describes how to view historical data, how
to generate reports, and how to update the Control
software. This instruction sheet also explains how
the BankGuard PLUS Control works during normal
operation.
Troubleshooting
1011-550 describes how to diagnose and correct
various BankGuard PLUS Control problems.
Latest Release of This Document
The latest release of this instruction sheet is available online at www.sandc.com.
Select: Support/ Product Support Documents. Documents are posted in PDF format.
Safety Information
WARNING
The equipment covered by this publication must be installed, operated, and maintained
by qualified persons who are knowledgeable in the installation, operation, and
maintenance of overhead electric power distribution equipment along with the
associated hazards. A qualified person is one who is trained and competent in:
z
The skills and techniques necessary to distinguish exposed live parts from non-live
parts of electrical equipment.
z
The skills and techniques necessary to determine the proper approach distances
corresponding to the voltages to which the qualified person will be exposed.
z
The proper use of the special precautionary techniques, personal protective
equipment, insulating and shielding materials, and insulated tools for working on or
near exposed energized parts of electrical equipment.
These instructions are intended only for such qualified persons. They are
not
intended
to be a substitute for adequate training and experience in safety procedures for this type
of equipment.
