Sana EUJ-828, User Manual

Page: 14 / 26

12
Set the control lever of the juicing
chamber to [

CLOSE
] as indicated by 1
Attach the bottom of the chamber to the tabs on
the base.
If the control lever is not set to
[

CLOSE
]
the
juicing chamber will not attach properly.
Check that the mark on the hopper lines up with
the mark on the base unit.
How to attach the juicing chamber to the body
The assembling method is same with all three strainers.
Note
The Sana 828 is equipped with safety sensors. If
the juicing chamber is not properly assembled, the
juicer will not operate to prevent damage.
Note
The hopper contains two magnetic sensors,
allowing it to be installed in both left and right-
facing positions.