San Telequip (P) Ltd.,
504, 505 Deron Heights, Baner Road
Pune 411 045, India
Phone: +91-20-27293455, 9764027070, 8390069393 Connecting. Converting. Leading!
email
---------------------------------------------------------------------------------------------------------------------------------------
Page
8
of
13
5.2.1 Enter ‘1’ to select Mode of work
•
If your device is SC15L APS then below message will display after your
selection :
Current Mode is: Not Set
<CR>
Select Work Mode
<CR>
<CR>
1 - PACKET Mode
<CR>
2 - Transparent Mode
<CR>
3
– APS241 Mode
<CR>
B - Back to Main
<CR>
E - Save & Exit
<CR>
<CR>
Enter <1-3/B, E>
<CR>
When you select APS241 Mode you have to enter the IO Slave ID your device on
which your MODBUS master will poll query.
Based on your requirement select mode of work. Then enter ‘B’ to go back to main
menu.
If your device is SC15L/SC15L241 then below message will display after your
selection:
Current Mode is: Not Set
<CR>
Select Work Mode
<CR>
<CR>
1 - Packet Mode
<CR>
2 - Transparent Mode
<CR>
3 - SC15L241 Mode
<CR>
B - Back to Main
<CR>
E - Save & Exit
<CR>
<CR>
Enter <1-2/B, E>
<CR>
When you select SC15L241 Mode you have to enter the IO data sending time for your
device in seconds.
Based on your requirement select mode of work. Then enter ‘B’ to go back to main
menu.
5.2.2 Enter ‘2’ to go into System Settings. Below message will display on your
screen:
Current Device Address is: 00000
<CR>
Current Destination Address is: 00000
<CR>
Current PAN ID is: 00001
<CR>
Current Data Rate is 1
<CR>
Select System Menu
<CR>
<CR>
