San Telequip (P) Ltd.,
504, 505 Deron Heights, Baner Road,
Pune 411 045, India.
Phone: +91-20-27293455, 9764027070, 8390069393 Connecting. Converting. Leading !
Email:
.
3
V3.0 (02/09/2021)
CONFIGURATION DETAILS
Configuration parameters supported through USB console
1) Network threshold, APN name, baud rate
2) IoT protocol can be HTTP GET, HTTP POST, MQTT or FTP. It is set in the gateway before
dispatch to site. For uploading data to the server following parameters need to be set using
USB console.
HTTP GET
o
For HTTP GET protocol, CSV URL Path and CSV name need to configured
through console port.
HTTP POST
o
For HTTP POST protocol, CSV URL Path and CSV name need to configured
through console port.
MQTT
o
For MQTT protocol, CSV URL Path and CSV name need to configured through
console port.
o
Following MQTT settings need to be configured in the gateway to connect the
server.
o
MQTT server, MQTT server port, client identifier, user name and password,
Publish topic, subscribe topic, keep alive timer.
o
Note: If username and password are not provided, then it can be left blank.
If client identifier is not provided from MQTT server, then any client identifier can be
configured (Max 24 characters). It should not be left blank. If multiple gateways are
connected to server, then this client ID should be unique for each gateway.
FTP
o
For FTP protocol, CSV URL Path and CSV name need to configured through
console port.
o
FTP server settings: FTP server, FTP port, user name, password and IO CSV
name.
ASCII data to cloud server
Gateway can be configured to accept data in ASCII format and send the data to cloud
using HTTP, MQTT and FTP. This can be enabled at the time of factory settings.
If ASCII serial protocol data to be uploaded then CSV URL Path and name menu will
change to webserver URL and upload interval as modbus configuration mapping will
not be required.
