49
10. Modification
10.1 Temperature
Water temperature can be modified from -3 to +3
10.2 Voltage
Voltage can be modified from -3 to +3
10.3 Beam angle
Bean angle is frequency angle from transducer. Low frequency can detect wide area and
higher frequency can detect lower area. Bean angle can be modified from 4˚ to 26˚
Depending on beam angle, receiving radius of bottom can be displayed on A-Scope and
receiving radius can be changed depending on type of beam angle.
Setting for temp modification
select [calib.]
Select [temp.]
Select from -3 to +3
Setting for voltage modification
select [calib.]
select [voltage]
(select among
『-3~ +3』
)
Setting for low frequency beam angle
select [calib.]
select [beam angle(LF)]
select among『4˚~ 26˚』
Setting for high frequency beam angle modification
select [calib.]
select [beam angle(HF)]
select among
『4˚~ 26˚』
