Samyung NAVIS800FS, Instruction Manual

Page: 59 / 104

59
If set up a range of Anchor Alarm to [2.SET]

[2.ALRAM SET]

[3.ANCHOR ALARM], the range of
anchor alarm show as a red circle in a plotter screen. Besides, the relative information as such Lat/Lon,
direction, break away
distance etc. with set up “ANCHOR” in a bottom-left of the Plotter screen are shown.
If the vessel breaks away from a range of anchor alarm, the alarm sounds and the red circle blinks in
order to advise of the vessel’s break away from the range.
For 'ANCHOR ALARM', move [2.SET]

[1.NAVIGATION SET]

[4.EXIT WPT/RTE/ANCHOR] and
press ( ) button or press
( )
button.
(
☞
Refer to
‘2.1.4 EXIT WPT/RTE/ANCHOR
(Navigation Cancellation)
’
)
[ Ref. ]
☞
If the anchor alarm is set [OFF], the red circle and alarm sounds don
’t take
place in a plotter screen.