Samyung NAVIS800FS, Instruction Manual

Page: 74 / 104

74
Miscellaneous Setup
Items
Input Range Description
1. DISTANCE UNIT
NM/KM/MM Select the distance unit on the Display.
NM: Nautical Mile (1NM = 1,852 m)
KM: Kilometer (1KM = 1,000 m)
MM: Land Mile (1MM = 1,610 m)
2. MAGNETIC VAR.
True/Magnetic
E00.0°~ E99.9°
W00.0°~ W99.9°
True North differs slightly from Magnetic
North, This is 'Magnetic Bearing
Deviation' and it varies slightly based on
the earth point. In using Magnetic North, it can be
corrected by inputting ‘Magnetic Bearing Deviation’.
3. COURSE-UP SET Auto/Course/North/
East/South/West
To set up the direction of the map display.
AUTO : Same as the own ship heading
COURSE : Same as the destination
NORTH/EAST/SOUTH/WEST
: North direction based on the preset Plotter map
4. CABLE DISPLAY ON/OFF Show the location of cable installed on a seabed.
5. WRECK DISPLAY ON/OFF Display the location of wreck
6. FISHING AREA Display information for fishing area.
Fishing area shown by thick blue line.
7. POSITION PRINT 00 Min. 00 Sec. ~
60 Min. 00 Sec.
To print the own ship position, speed, bearing at the
intervals of preset time. When not using this function, it
is 00 Min. 00 Sec.
8. SPECIAL SHIP
Name of special ship,
00:00 ~ 23:59
For wastes carrier only. Using our SV-100, automatically
print the time and position of valve
‘s Open and Shut
out.
9. PASSWORD SET
0000 ~ 9999
To set up Password for the system approach.
When not using this function, it is is '0000'.
Note : Default value is '0000'.
[
Ref. ]
☞
Bearing Deviation
As for [2. MAGNETIC VAR.], True North should be used as it is always automatic,
except when Magnetic should be used.
※
Instance of Bearing Deviation
If GPS data bearing is 270 degrees and magnetic compass bearing is 280 degrees , input
(+)E10.0 to display the same as magnetic bearing because the difference is +10. If GPS
data bearing is 280 degrees and magnetic compass bearing is 270 degrees , input (-)W10.0
because the difference is -10.