Samyung BNW - 50, User Manual

Page: 22 / 64

22
After changing all the settings press
MENU
, then
you will be asked if you wish to save, press “YES”
then to save.
4.4.3 SYSTEM SETUP
On this menu, you may update the software, initialize
the system, check the version and set the alarm test
mode.
Version update ( Update ROM )
This function is used when updating the display unit
version, and figures "S00.017(2011.07.12)"and "D0
0.017(20 11.07.12)" shown on the right side means the
display unit’s version of the each processor unit.
Initialize
When you wish to initialize the setting, move the cursor
to "Initialize" then press , then you will be asked if
you wish to initialize. Move to “YES” then press .
This will initialize the system and you will be brought
to the password setting screen (as shown on the
picture below).
You must be aware that by using this function, all the settings will initialize
.