]
75
2.3 How to set up Vessel
This function set is used to configure a variety of information on the vessel.
Vessel Auto Center ON/OFF
- To indicate the vessel in the center of the display all the time.
[2.SET]
[3.SHIP SET]
[1.AUTO CENTER]
(Whenever press, [ON/OFF] repeatedly selected.)
SHIP MARK SIZE SET
- To set ship mark size
[2.SET]
[3.SHIP SET]
[2.SHIP MARK SIZE]
(Whenever press, [small/large] repeatedly selected.)
76
<Recommendable SMOOTHING Value>
Types
Lon/Lat Smoothing
Value
Speed/Bearing
Smoothing Value
Commercial,
Squid
Fishing,
Tuna Fishing
1
1
Single & Twin Trawl
2
3
Low speed small fishing boats.
3~5
6~9
SMOOTHING SET
- The set up differs from the vessel type. The higher the value entered, the more stable it is.
[2.SET]
[3.SHIP SET]
[4.SMOOTHING SET]
Input position
smoothing value (1 - 9),
Input speed smoothing value (0 ~ 399),
Input
bearing smoothing value (0 ~ 99),
LAT/LON CORRECTION
- If any value error of the current position, the log/lat. can be corrected per second, minute with this
function.
[2.SET]
[3.SHIP SET]
[5.LAT/LON CORRECTION]
Input
LAT correction value(
±
00.00 ~
±
99.99),
Input LON correction value(
±
00.00 ~
±
99.99),
HEADING DISPLAY
ON/OFF
[2.SET]
[3.SHIP SET]
[6.HEADING DISPLAY]
(Whenever press, [ON/OFF] repeatedly selected.)
RADIUS SET
- To indicate the radius in red circle, making the vessel as a starting point.
[2.SET]
[3.SHIP SET]
[3.RADIUS SET]
Input range (0.01
~ 9.99NM),
