PAGE 18 of 79 VULCAIN OIL-FIRED HEATER
LAST UPDATED: JAN 22-2019 COPYRIGHT © SAMUEL JACKSON, INCORPORATED 2018 ALL RIGHTS RESERVED
Moisture Mirror X Option
Remote Control and Optional Automatic Control
The 1500 series Heaters are compatible with the optional Moisture Mirror X offering
remote control (normally from ginner’s console) of the unit via a CAT5 ethernet
connection. It has the ability to control up to eight Samuel Jackson Heaters and four
Samuel Jackson Humidaire Units.
When the Moisture Mirror X is equipped with compatible moisture sensors at various
stages in the ginning process it offers automatic dryer temperature control. It can also
automatically adjust the water temperature setpoint on the lint moisture Humidaire Unit
supplying moist air to moist air applicators like the Steamroller and Super Grid. Refer to
the Moisture Mirror X manual for more information on features, connections and
compatible moisture sensors.
Displayed on the Moisture Mirror X are the START / STOP operations, temperature
settings, actual and target temperatures, and information such as runtimes. When an
ERROR or ALARM occurs, this information is also displayed and can be cleared from
the Moisture Mirror X console.
After pressing the desired Heater button, for instance “Heater 1”, the screen below will
appear. Here you can start/stop, adjust temperatures, and view error messages for the
specific Heater.
Home Screen for Moisture Mirror X
Press Start to run the
heater and Press Stop to
turn the unit off.
Red numbers indicate
before-mix temperatures,
and blue numbers
represent after-mix
temperatures.
Press the “Shed” button
between Start and Stop to
enable or disable “Shed”.
Indicates the current status of the
heater. “Run”, “Standby”, “Shed
Off”, “Ready” among others.
Press Target to navigate
to the temperature target
screen.
Summary of Contents for Vulcain
Page 1: ...Vulcain Oil Fired Heaters...
