- 16 -
18.INSTALL THE FLASH LIGHT(OPTIONAL ACCESSORY)
Can only use 24V DC Flash Light.
19.MAINTENANCE
No particular maintenance is required for the logic circuit board.
Check the door at least twice a year if it is properly balanced, and all working parts are in good
working condition or not.
Check the reversing sensitivity at least twice a year, and adjust if it is necessary.
Make sure that the safety devices are working effectively (IR Beams, etc.)
Notice: A rude operating door can affect the life of the automatic opener due to incorrect
loads, and will void the warranty.
20.FINAL NOTES
This manual is only used by technical persons who are qualified to carry out the installation.
No given information in this manual can be considered of any interest to the end user.
It is important for the installer to show their clients correct operation using of the opener including
the using of manual disengagement cord.
Inform the owner about the need of a regular and accurate maintenance, especially regarding a
regular check of the safety and reversing devices.
