SAMSys MP9320, User Manual

Page: 16 / 66

MP9320 User’s Guide
8
Installing the SSTool Application
The SSTool is a Microsoft Windows based serial data interface
application for SAMSys readers. The application allows you to
easily view tag data, configure the reader, and perform other tag
data functions. This application is provided on the CD shipped
with your reader and can be installed on a personal computer.
To install the SSTool, refer to Chapter 1 - Installation in the
SSTool User’s Guide.
Configuring for Single or Multiple Readers
The MP9320 can be operated as a single reader solution or
networked with other readers. If you are placing the reader in a
networked configuration, refer to Chapter 2 -
Installation for
additional information. For network addressing, refer to the
SAMSys
Interrogator Control and Concentrator Module User’s
Guide for detailed information on assigning network addresses.
Configuring the Serial Port
The RS-232 port on the MP9320 is factory configured as follows:
• 9600 Baud
• 8 Data Bits
• 1 Stop Bit
• No Parity
Refer to the Reader Configuration chapter in the Comprehensive
Heuristic Unified Messaging Protocol Reference Guide for serial
port programming information.