SAMSys MP9320, User Manual

Page: 17 / 66

Getting Started
9
Connecting the Reader to a Terminal
The MP9320 can be connected to a personal computer, laptop, or
other serial device equipped with a terminal emulation program.
Perform the following to connect the reader to a serial device.
1. Connect an RS-232 cable from the serial port on the reader to
the serial port on the terminal (see Chapter 2 - Installation ).
2. Use the SSTool to set the terminal serial port parameters to
the reader default values (9600, 8, 1, none).
Connecting the Reader to the ICCM
The MP9320 can be connected to the Interrogator Control and
Concentrator Module. Perform the following to connect the
reader to a serial device.
1. Connect an RS-232 or RS-485 cable from the appropriate
port on the reader to the serial or RS-485 port on the ICCM
(see Chapter 2 -
Installation ).
2. Power up both the reader and the ICCM.
3. Follow the instructions in the Interrogator Control and
Concentrator Module User’s Guide for information on using
the ICCM to view tag data from the reader.