SAMSys MP9320, User Manual

Page: 28 / 66

MP9320 User’s Guide
20
Wood or Metal Wall Mounting
To temporarily mount the MP9320 to a wood or sheet metal wall,
SAMSys recommends either #10 x 1 inch wood screws or #10 x
3/4 inch sheet metal screws and flat washers. To install the
MP9320 on a wood or metal wall, perform the following.
1. Refer to Figure 8, and mark the location of the mounting
screws.
2. Drill the appropriate size hole for screws.
3. Install the washers and insert the screws.
4. Tighten the screws to within .375” of the surface.
5. Install the reader and finish tightening the screws.
Drywall Mounting
To temporarily mount the MP9320 to drywall, SAMSys
recommends either #10 toggle bolts or #10 drywall anchors.
NOTE: There are many types of screw-in, hammer-in, and predrill drywall
anchors. Each one is designed for specific applications and pull-
out ratings. Ensure that the anchor you select has a pull-out
rating of at least 12 lbs.
To install the MP9320 on drywall, perform the following.
1. Refer to Figure 8, and mark the location of the mounting
screws.
2. Refer to the anchor manufactureres instructions for installing
the anchors.
3. Install the washers and insert the screws.
4. Tighten the screws to within .375” of the surface.
5. Install the reader and finish tightening the screws.