Samsung Xpress M2675FN User Manual Download Page 130

Page: 130 / 328

Regulatory information

129

5. Appendix

Taiwan only

Radio frequency emissions

FCC information to the user

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received, including interference
that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

•

Consult the dealer or experienced radio TV technician for help.

Change or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the
equipment.

Summary of Contents for Xpress M2675FN









































































































































































































































































































































Search results

Summary of Contents for Xpress M2675FN

Reviews:

Related manuals for Xpress M2675FN

Brands by name

Popular brands

Samsung Xpress M2675FN, User Manual

Search results

Summary of Contents for Xpress M2675FN

Reviews:

Related manuals for Xpress M2675FN

Brands by name

Popular brands