English
47
Maintenance
Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle.
DRUM CLEAN / DRUM CLEAN+
Perform this cycle regularly to clean the drum by removing bacteria from it. This cycle heats the water
between 60 °C and 70 °C, and it also removes accumulated dirt from the rubber door gasket.
1.
Press
Power
to turn on the washing machine.
2.
Turn the
Cycle Selector
to select
DRUM CLEAN
/
DRUM CLEAN+
.
3.
Press and hold
Start/Pause
.
NOTE
• The water temperature for
DRUM CLEAN
/
DRUM CLEAN+
is set to 70 °C, which cannot be changed.
• It is recommended to run the
DRUM CLEAN
/
DRUM CLEAN+
cycle once every 40 washes.
• To prevent limescale, add the proper amount of detergent according to your local water hardness or add
a water softener additive together with the detergent.
DRUM CLEAN / DRUM CLEAN+ reminder
Depending on the model, the
DRUM CLEAN
/
DRUM CLEAN+
reminder is either an icon or an LED.
For icons, the icon lights up on the control panel.
For LEDs, the LED lights up next to
DRUM CLEAN
/
DRUM CLEAN+
, or on the option area of the control
panel.
• The
DRUM CLEAN
/
DRUM CLEAN+
reminder blinks on the control panel once every 40 washes. It is
advisable to perform
DRUM CLEAN
/
DRUM CLEAN+
regularly.
• When you first see this reminder blinking, you can ignore the reminder for 6 consecutive washes. From
the 7
th
wash, the reminder no longer appears. However, it appears again on the second 40
th
wash.
• Even after the last process is terminated, the "
0
" message may remain.
• Even if "
0
" does not disappear, the machine operates normally.
• It is recommended to run the cycle regularly for hygienic purposes.
Untitled-16 47
2024-01-05 12:28:27
