maintenance
_9
maintenance
WHEN YOU LOAD THE LAUNDRY INTO THE SPIN BASKET.
Press the laundry evenly and put the safety cover into the spin basket drum as shown in the figure.
Bottom of balancer
Safety cover
Inner Lid
Safety
Cover
troubleshooting
TrouBlE
chEcK PoINT
The washing machine does not
work.
Check that the power cord is connected to a power outlet well.
Power stoppage?
Clothes does not move freely.
Is the laundry overloaded?
Incomplete spinning.
(Severe vibration or unbalance.)
Are the laundry arranged evenly?
Â
Â
See “When you load...” on page 9.
Water does not drain.
Be sure lay the drain hose down.
Â
Â
See page 3.
The spin dryer basket does not
run.
Is the spin dryer lid closed completely?
Are laundry (socks,etc.) falling out of the spin dryer basket and clinging
to the axle?
The water drains out immediately.
Is the Drain Selector set to drain?
Is the drain hose clogged with scrap?
Â
Â
Hang up drain hose over the drain hose hook. Half fill the wash tub
with the water and try for drain again. (Scrab will be removed by
water drain pressure.)
Pulsator not moving.
• Although the machine may stay still, maximum
5 minutes.
If the WASH TIMER indicates in excess of 15
minutes. It is just in the process of soaking and
not a breakdown.
• Check the knob position.
It should not be in ‘No Work’ zone.
Spin Basket not moving
• Check the knob position.
It should not be in ‘No Work’ zone.
[INDUS2]WT727-03218C_EN_130621.indd 9
2013-06-27 �� 11:37:45