Samsung WS-28M204D Owner'S Instructions Manual Download Page 61

Page: 61 / 62

English - 61

Automatic Degaussing to Remove Colour Patches

Troubleshooting:

Before Contacting Service Personnel

Before contacting the Samsung after-sales service, perform the following simple checks.

If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact the help desk at 0870-242-0303 or [email protected].

No sound or picture

Normal picture but no sound

No picture or black and white picture

Sound and picture interference

Blurred or snowy picture,
distorted sound

Remote control malfunctions

◆

Check that the mains lead has been connected to a wall socket.

◆

Check that you have pressed the “

” (On/Off) button and the

POWER

(

) button.

◆

Check the picture contrast and brightness settings.

◆

Check the volume.

◆

Check the volume.

◆

Check whether the

MUTE

(

) button on the remote control has

been pressed.

◆

Adjust the colour settings.

◆

Check that the broadcast system selected is correct.

◆

Try to identify the electrical appliance that is affecting the television,
then move it further away.

◆

Plug your television into a different mains socket.

◆

Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.

◆

Replace the remote control batteries.

◆

Clean the upper edge of the remote control (transmission window).

◆

Check the battery terminals.

A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.

If you move the television to a different position and colour patches appear on the screen, you must:

◆

Switch the television off by pressing the “

” (On/Off) button on the front panel

◆

Unplug the television from the wall socket

◆

Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, and then press the “

” (On/Off) button on the front panel.

☛

If your television will be left unattended, press the “

” (On/Off) button to turn your

television off.

AA68-03541A-X12Eng 2005/04/28 09:16 AM Page 61

Summary of Contents for WS-28M204D































































Search results

Summary of Contents for WS-28M204D

Reviews:

Related manuals for WS-28M204D

Brands by name

Popular brands

Samsung WS-28M204D, Owner'S Instructions Manual

Search results

Summary of Contents for WS-28M204D

Reviews:

Related manuals for WS-28M204D

Brands by name

Popular brands