- 36 -
Part Name
Figure
Method of Repair
Condenser
Replacement
1. Remove the Deco top & Top cover
- Loosen the screws
- Remove the connector
Check Point
1. Check for damage to the outer look and the
terminals
Belt /
Pulley
Replacement
Check Point
1. Check if the belt is broken or cracked.
2. Check the pulley and the cooling fan for any
damage.
Dry Motor
Replacement
1. Loosen the fixing nuts for the pulley
(uses a 10mm Box)
- Loosen the screws
2. Remove the white (WHT) connector at the
bottom of the frame plate (U)
(Power cable for the dry motor)
Check Point
1. Turn the motor by hand to check if it
rotates properly.
2. Measure the internal resistance (between WHT
and BLU)
- number Ω: short, ∞ : disconnected
