- 29 -
Part Name
Figure
Method of Repair
Exchangin
g the Sub
PCB
and the
Power S/W
1. Remove the four screws on the back.
2. Separate the Deco top (L,R) by pushing it backwards.
Remove the two screws used to fix the Cover top.
Remove the screws used to fix the Deco Front (L,R)
with the Cover Top.
3. Put a I-type screwdriver into the gap between the Cover
Front (L) and the Cover Front Panel and press
downwards to separate the hook.
Remove the two screws used to fix the Deco Front (L,R)
(for fixing the lower part)
4. Remove the Deco Front L,R
(Caution: Knock the Deco Front L,R in an upward
direction to disassemble it.)
5. Remove the Detergent Drawer
(You can pull out the detergent drawer by pressing the
red-colored hook at the rear of the drawer.)
Separate the wire connected to the Power S/W and the
Sub PCB.
Remove the Sub PCB.
Check Trouble Points
1. Check whether all of the LEDs are turned on in the
Display window at the time of the Power S/W being
turned ON.
2. Check whether the buttons on the lower part are turned
on.
3. Check whether pressing each button functions.
4. Check whether pressing each button once or more
functions to turn off their lamp.
①
③
④
⑤
②
