- 30 -
Part Name
Figure
Method of Repair
Drain
PUMP
1. Put an I-type screwdriver into the gap between
the Cover Front (L) and the Cover Front Panel
and press downdwards to separate the hook.
2
. Turn the Cap Drain Hose anti-clockwise and
separate it from the Frame front (L).
- Separate the remaining Water Drain Hose from
the Cap Drain.
(Place a dish on the ground, place the Hose
over it, and remove any remaining water.)
- Remove the two screws.
- Incline the set to the back and draw out the
Drain Pump.
3. Separate the connection wire.
(Caution : Be sure to check that the power plug
is unplugged at the time of repair. There may
be a danger of electric shock.)
4. Separate the Hose Filter Tub/Drain Hose.
Check Trouble Points
1. Separate the Filter and check whether there are
any foreign substances (coins, buttons, etc.) in
the Pump.--- If so, remove them.
2. Check whether the wire which is used to steer
the Pump has come loose from its exact
position. -- If so, it needs treatment.
3. Check the asseembly condition of the Clamp
Hose and the Cap Drain if water is leaking.-- If
so, it needs treatment.
Turn the Filter anti-clockwise and remove the
remaining water.
②
①
③
④
