WEA453e Installation Manual
Version 1.0
Samsung Electronics America
Page
28
of
117
2.4.1
Wall Mounting
Marking
Mark the points where the system is to be installed and the anchor bolts are to be fixed
using an inking line or pen.
When drilling and anchoring the system on the wall without confirming the
horizontal/vertical position of the marked points, the level can only be adjusted by
a small amount.
Then inspect the level of the marked points to check whether they are
horizontal/vertical by referring to 'System Leveling', and adjust them accordingly.
To minimize the margin of marking errors by the operator, it is recommended to
determine the exact placement of the system first. Place the system in the
appropriate place and then mark the locations to fix the anchor bolts using a pen.
Figure 10.
Marking the Outdoor AP
Unit: mm
Plastic Anchor Hole
(Ф 5)
63.9
9
3
.7
5
184
267
