WEA453e Installation Manual
Version 1.0
Samsung Electronics America
Page
113
of
117
Assembling Heat Shrink Tube
1) After assembling a pressure terminal, move the heat shrink tube, inserted to the cable, to
the end of pressure terminal copper tube.
Figure 88.
Assembling Heat Shrink Tube (1)
2) Set the temperature of the heat gun to 180-200°C.
3) Locate a heat shrink tube to cover the entire copper tube of the pressure terminal.
4) Rotate a heat gun 360° to apply heat evenly to shrink the tube.
(Because the pressure terminal and the cable is hot due to the heat of a heating gun, be
careful not to have a burn.)
Figure 89.
Assembling Heat Shrink Tube (2)
Heat Shrink Tube
Pressure Terminal