English 29
Ins
tallation
B
C
3.
If the washer is level, the
pulsator
(A)
will be positioned at the center of
the tub as shown in the figure on the
previous page. If it isn't, level your
washer by turning the front leveling
feet clockwise or counterclockwise as
necessary.
NOTE
Turn the front leveling feet
clockwise (B)
to
lower the washer, and
counterclockwise (C)
to raise the washer.
STEP 5
Powering your washer
Plug the power cord into a 3-prong, well
grounded, 120 volt 60 Hz, approved
electrical outlet protected by a 15-amp fuse
or comparable circuit breaker.
Your washer is grounded through the third
prong of the power cord when plugged into
a three-prong grounded electrical outlet.
Test run
Make sure that you installed your washer
correctly by running the
RINSE+SPIN
after
the installation is complete. See Step 6 on
the next page.
WA8700M_WA54M8750A_DC68-03774B-02_EN.indd 29
2017-04-18 9:59:47
Summary of Contents for WA54M8750AV
Page 1: ...Washer User manual WA54M8750A WA8700M_WA54M8750A_DC68 03774B 02_EN indd 1 2017 04 18 9 59 41...
Page 75: ...Memo WA8700M_WA54M8750A_DC68 03774B 02_EN indd 75 2017 04 18 9 59 57...
Page 151: ...M mo WA8700M_WA54M8750A_DC68 03774B 02_CFR indd 75 2017 04 18 9 58 50...
Page 227: ...Notas WA8700M_WA54M8750A_DC68 03774B 02_MES indd 75 2017 04 18 9 59 25...