Maintenance
English
52
Maintenance
Cleaning the exterior
1.
Turn off the water taps after finishing the day’s washing. This will shut off the water
supply to your washer and prevent the unlikely possibility of damage from escaping
water. Leave the lid open to allow the inside of your washer to dry out.
2.
Use a soft cloth to wipe up all detergent, bleach, or other spills as they occur. Clean the
following as recommended below:
-
Control Panel – Clean with a soft, damp cloth. Do not use abrasive powders or
cleaning pads. Do not spray cleaners directly on the panel.
-
Cabinet – Clean with soap and water.
Cleaning the interior
Clean the interior of your washer periodically to remove any dirt, soil, odor, mold, mildew,
or bacterial residue that may remain in your washer as a result of washing clothes.
CAUTION
Failure to follow these instructions may result in unpleasant conditions, including odors
and/or permanent stains on your washer or laundry.
NOTE
Hard water deposits may be removed, if needed. Use a cleaner labeled “Washer safe”.
Care for an extended period of non-use
Avoid leaving the washer unused for an extended time. However, if you intend to leave
the washer unused for a long period of time, follow the directions below:
1.
Press
Power
, and then turn the
Cycle Selector
to
QUICK WASH
.
2.
Empty the drum, and then press and hold
Start/Pause (Hold to Start)
.
3.
When the cycle is complete, close the water taps and disconnect the water hoses.
4.
Turn off the washer, and then unplug the power cord.
5.
Open the door to let air circulate through the drum.
Untitled-6 52
Untitled-6 52
2021-05-25 8:26:41
2021-05-25 8:26:41
