English
57
Troubleshooting
Problem
Action
Water is not supplied.
•
Make sure you press or tap
Start/Pause (Hold to Start)
after selecting the cycle and options.
•
Make sure the water taps are open.
•
Are the mesh filters in the water inlets clogged? Clean the
mesh filters by brushing with a toothbrush. See page
53
.
•
Is the water supply cut off? If the water supply is cut off,
close the tap and power off.
•
Straighten the water supply hoses.
•
Open and close the door, and then press or tap
Start/Pause
(Hold to Start)
.
•
If the water pressure is low, it takes longer to start
washing.
•
If the water level is not as high as necessary or lower than
expected, use the level selector to adjust the water level.
After a cycle, detergent
remains in the automatic
dispenser.
•
Make sure the washing machine is running with sufficient
water pressure.
•
Make sure the detergent drawer is properly inserted.
•
Remove and clean the detergent drawer, and then try
again.
Vibrates excessively or
makes noise.
•
Make sure the washing machine is on a level floor. If
the floor is not level, use the levelling feet to adjust the
washing machine.
•
Make sure the washing machine is not contacting any
other object.
•
Make sure the laundry load is balanced.
•
Make sure the laundry is spread evenly in the washing
machine. Spread out the laundry evenly and start again.
•
Make sure the space around the washing machine is free
of objects.
•
Humming is produced normally during operation.
•
Objects such as coins can cause noise. Remove these
objects from the washing machine after washing is
complete.
Untitled-6 57
Untitled-6 57
2021-05-25 8:26:42
2021-05-25 8:26:42
