Installation
English
20
Installation
1.
Attach the water hoses to the hot and
cold water taps, and then hand tighten
the water hose fittings until they are
tight. Then, use pliers to tighten the
fittings by an additional two-thirds of a
turn. To avoid damaging the fittings, do
not overtighten them.
2.
Pull the water hoses to check if they
are firmly connected.
3.
Put the other ends of the hoses into
a bucket, and then open the water
taps for 10 - 15 seconds to remove
impurities. When done, close the taps.
Untitled-1 20
Untitled-1 20
2022-01-25 2:57:28
2022-01-25 2:57:28
Summary of Contents for WA49B5205AW/US
