washing a load of laundry
_25
washing a load of laundry
_25
WASHING FOR THE FIRST TIME
Before starting to wash, check the following:
1.
Connect the water supply hose to the water tap. Open the tap. Connect the power to the washer.
Ensure that the drain hose is placed properly.
2.
Make the drain hose in installed properly.
Before performing a wash for the fi rst time, you must run a complete cycle without adding any laundry.
1.
Press the
Power
button.
2.
Open the detergent drawer and insert a little detergent.
3.
Turn on the water supply to the washer.
4.
Press the
Start/Pause
button.
This will remove any water remaining from the manufacturer’s test run.
AUTOMATIC SENSING FUNCTION
Your washer is equipped with an automatic sensing function which automatically senses the amount of
laundry and the appropriate water level, wash time, rinse cycle, and spin time.
This does not apply for the Soak and Wool programs.
Special notes!
After the power is on, a program is selected and the
Start/Pause
button is pressed, the
washing board starts spinning without water. This action senses how much laundry is in the
washing basket, and this is not a machine problem. After the sensing process has completed,
water is supplied automatically.
02 W
ASHING A L
O
AD OF LA
UNDR
Y
WA17GWGIH-02685M_EN.indd Sec6:25
WA17GWGIH-02685M_EN.indd Sec6:25
2011-12-06 3:39:29
2011-12-06 3:39:29
