20_
setting up your washer
20_
setting up your washer
setting up your washer
Step 4
Powering and positioning your washer
1.
Plug the power cord into a 3-pronged well-grounded fuse or comparable circuit breaker. (For
more information on electrical and grounding requirements, see page 16.)
2.
Slide the washer into position.
Adjusting the levelling feet
When installing your washing machine, ensure that the power plug, the water supply and
the drain are easily accessible.
1.
Slide the washing machine into position.
2.
Level your washer by turning the adjustable nut, as shown
in the fi gure.
3.
When your washing machine is level, tighten the locking
nut using the (-) screwdriver.
Waterdrop mark
Cause
How to level
The front of the washer
is lower
Level the washer by adjusting the legs.
The back of the washer
is lower
Adjust the height by using the props at the
back.
The left of the washer
is lower
Adjust the left side by using the adjustable legs
at the front and props at the back.
The right of the washer
is lower
Adjust the left side by using the adjustable legs
at the front and props at the back.
Locking nut
Adjustable nut
WA17GWGIH-02685M_EN.indd Sec3:20
WA17GWGIH-02685M_EN.indd Sec3:20
2011-12-06 3:39:27
2011-12-06 3:39:27
