v
Caring for water/dust/shock-proof capability
Cleaning after using the product under/near water
After using the product in water, rinse to remove foreign substances or salt from the product within 1 hour.
1
Immerse the product in clean water for 2~3 minutes, and then
gently shake it in the water to rinse it.
Hold the product with the cleaned part facing down, and then gently
shake the product.
2
Remove the product from the water, and then wipe the water
droplets off the product with a soft and dry cloth.
•
3
Dry the product completely in a well ventilated and shaded area.
Bubbles may appear when the product is soaking in water. This is not a
malfunction.
If the product is not rinsed completely, the water-proof performance may
deteriorate.
Press each button of the product to remove salt or other foreign
substances between/around the buttons.
Do not use chemicals to clean the product including soap, neutral
detergent or alcohol. You can damage the product’s water-proof
capability.
This product is designed to drain well. The water drains through the
small holes around the buttons on the product.
Do not use a device such as a hair dryer to dry the product. The water-
proof performance may deteriorate or the appearance of the product
can be transformed.
Do not open the memory card/HDMI jack cover and the USB plug cover
until the product has dried out.
If there is water on this product, wipe it off with a soft and dry cloth until
it is completely dry.
After using the product under/near water, dry the internal microphone
and speaker of the product completely. Not doing so may decrease the
audio quality during video recording or playback.
Do not poke the speaker or microphone of the product with any sharp
object. Water-proof performance will be degraded.
•
•
•
•
•
•
•
•
•
•
