Samsung VS25C97 Series, User Manual

Page: 19 / 48

English 19
Oper
ation
Using the buttons and display
8:
89
8;
01 Display
- Displays the current mode (‘ MIN , AI , MID , MAX , JET , or WET ’) or the
alert message.
02 Power ( )
- Press this button to turn on or off the vacuum cleaner.
- When you turn on the power, the vacuum cleaner starts in the ‘ MID ’
mode.
- If you assemble the Spray Spinning Sweeper, the vacuum cleaner
starts in the ‘
WET ’ mode.
- If you assemble the Active Dual Brush or Slim LED Brush+, the
vacuum cleaner starts in the ‘
AI ’ mode.
03 Suction power control ( + / - )
- You can change the suction power mode (‘ MIN , AI , MID , MAX , or
JET ’).
- In the ' AI ' mode, the vacuum cleaner automatically adjusts
the suction power and brush rotation speed according to the
surrounding environment for optimized performance. The vacuum
cleaner proceeds the optimization process for 1 ~ 2 seconds when it
detects changes in the floor.
- In the ‘ WET ’ mode, press the + button to spray water once or press
and hold the + button to spray water for up to 2 seconds.
- While the vacuum cleaner is on the Clean Station, press and hold the
+ button for 5 seconds to enable or disable the Energy Saving mode.
Press and hold the Auto Empty button on the Clean Station for 15
seconds to turn off the Wi-Fi and save extra energy.
NOTE
• The ‘ AI ’ mode is only available if the Active Dual Brush or Slim LED Brush+ is assembled.
• The ‘ AI ’ mode may not work well on some floor environments (floors with thin rugs and some yoga mats
with grooves, etc.).
• The automatic brush rotation speed adjustment in the ‘ AI ’ mode is only available when the Active Dual
Brush is attached.
• Only the + button works when the vacuum cleaner is in the ‘ WET ’ mode.
• You cannot enter the language settings when the vacuum cleaner is in the ‘ WET ’ mode.
• The Energy Saving mode is automatically disabled if you use the vacuum cleaner.
• The brush may cling to the floor or does not turn properly depending on the floor material (a carpet, a
mat, bedding, etc.). If such a problem occurs, change the suction power mode to ‘ MIN or MID ’.
Selecting the language
1. Press and hold the + button for 3 seconds to enter or exit the language setting.
2. Press the + or – button to select a language.
Untitled-4 19 2023-05-17 1:55:35