Samsung VP-D371, Service Manual

Page: 13 / 212

Samsung Electronics
3-1
3. Alignment and Adjustment
3-1 VCR Adjustment
3-1-1 Adjustment Preparation
1) Before you start
Œ
Use the buttons on the SET key when adjusting VCR.
´
When changing the adjustment item, please press the "OK" and "DISPLAY" buttons on the Set.
ˇ
You can change the adjustment value to Press the W( )/T( ) button
¨
Press the push the "OK Button" when storing confirmed adjustment value of each adjustment
step in EEPROM.
ˆ
The OSD shows "OK" after finishing each adjustment step.
Ø
To clear the adjustment mode, pull out the power source.
2) Function of each buttons on the Set Key
Buttons Description
OK Button push (Confirm) Stores changed value in the adjustment and auto adjustment mode.
T( ) (Data Down) Changes data in the adjustment state.
W( ) (Data Up)
EASY-Q (Mode Up) Changes mode.
DISPLAY (Mode Down)
<Table 3-1>
3) How to get into the VCR adjust mode
[STEP 1]
Œ
Connect the Power source.
´
Set the Power Switch to “PLAY” position and Mode Switch to “TAPE” position.
Fig. 3-1