27
/
56
7.2.1 Power Distribution Cabinet
:
Each VMR-I HD display requires a power distribution cabinet.
Samsung Company
provides customers with a variety of power distribution cabinets. It also customizes
the matching power distribution cabinets for specific projects. And the connection
can refer to the relevant manual.
7.2.2 Power Cord
:
The wire size is 3 x 2.5mm², one is the parent aviation head and the other is the male
aviation head.
7.2.3 Main Power Cord
:
Connect the power cable between the cabinet and the power distribution cabinet. The
cable size is 3*2.5mm². One end is connected to the power input port of the cabinet
and the other end is connected to the power distribution cabinet.
The maximum current of the aviation head used in the VMR-I HD series cabinet is
20A. To avoid the safety problems such as overheating and fire, the total current of
the cabinets cascaded by one main power supply must be <20*0.8. =16A, VMR-I HD
series display operating voltage range is 100 ~ 240VAC, indoor single cabinet power
consumption is about 160w, indoor single cabinet power consumption is about 240W,
under different input voltage conditions, The number of cabinets on a main power
cord is different. For the specific number, please refer to Table 7-1
100
~
240VAC
,
The indoor single-chassis power consumption is about 160w, and the
indoor single-cabinet power consumption is about 240W. Under different input voltage
conditions, the number of cabinets carried by one main power cable is different. For
the specific quantity, please refer to Table 7-1:
Form7-1
:
Product Model
Supply
Voltage
Single
Cabinet
Current
Single cabinet power cord
VMR-I P2.6
/2.9/3.9
110VAC
1.45A
10
220VAC
0.72A
20
7.2.4
Display power cord connection
1. Install the power distribution cabinet and install it near the screen according to the
site conditions to avoid the main power cable being too long.
2. Install the cabinet, refer to Chapter 6.
3. After the cabinet is installed, connect the power cord according to the design
drawings.
Picture 7-2 shows the connection of the power cable of the VMR-I HD display.
①
Distribution cabinet