Samsung ViasatHD DSB-H670N, User Manual

Page: 183 / 211

T E L
27
L I T E R E C E I V E R
DSB-H670N
GB
OPERATING THE RECEIVER
5.3.2 LNB Setup
This function sets the LNB manually. This function sets
the LNB manually. Default values are already entered
on this screen. Normally you do not need to change
these. If you change your satellite dish installation, you
may need to change the values.
●
Press the / key to select setup items.
●
Press the / key to select "LNB type" and "Number
of LNBs".
●
Enter Low Band and High Band frequency using the
numeric (0-9)
key.
RED
key: Return to the settings menu.
BLUE
key: Apply changes.
Note Note
: If more than one receiver are to be connected to the same SATCR LNB, already installed
receiver/s has to be disconnected from the wall socket. When the new receiver has been
installed, previously disconnected receivers can then be powered up again.
5.3.3 Scart Setup
This function sets the Scart output of your receiver.
●
Press the / key to select setup items.
●
Press the / key to select Scart output type.
TV Scart Output: "RGB", "Composite" and
"S-VIDEO".
AUX Scart Output: "Composite".
RED
key: Return to the settings menu.
BLUE
key: Apply changes.
Note Note : "AUX Scart Output" does not support RGB.
5.3.4 Resolution Setup
This function sets the resolution for the HDMI output.
●
Press the / to select 720p or 1080i.
RED
key: Return to the settings menu.
BLUE
key: Apply changes.