Samsung ViasatHD DSB-H670N, User Manual

Page: 173 / 211

T E L L I T E R E C E I V E R
17
T E L L I T E R E C E I V E R
DSB-H670N
GB
FIRST INSTALLATION
3. Default Transponder
●
Enter Frequency: Press the
numeric (0-9)
key to enter the
frequency.
●
Select Polarization: Press the / key to select
“Vertical” or “horizontal”.
●
Enter Symbol Rate: Press the
numeric (0-9)
key to
enter the Symbol Rate
●
Select FEC: Press the / key to select FEC (1/2,
2/3, 3/4, 5/6 or 7/8)
Press the
OK
key to confirm and move to the next
screen.
Press the
BACK
key to go to previous screen.
4. Signal Test
After the signal setup there will be signal test screen
showing Lock status on Home transponder.
If "Front end locked" says "Yes" it means that the
receiver has locked to signal from the satellite. If it says
"No", and the "POWER" and "Signal Quality" bars are
0%, you need to check your antenna alignment.
●
Press the
OK
key to confirm and move to the next
screen.
The locked channel will be displayed.
●
Press the
BACK
key to go to previous screen.
5. HD TV Setup
If your receiver is connected to the HD TV with HDMI
cable, the resolution setting screen will be displayed.
The optimal resolution for your combination of TV-set
and receiver will be highlighted as default. If you want
to select another resolution move the cursor with the
/ and press the
OK
key to select.