Samsung ViasatHD DSB-H670N, User Manual

Page: 169 / 211

T E L L I T E R E C E I V E R
13
DSB-H670N
GB
T E L L I T E R E C E I V E R
CONNECTING YOUR RECEIVER
After installing your antenna, connect the
coaxial cable from the LNB to "DISH INPUT"
on the back of your receiver.
All cable connectors should be finger
tightened; do not use any kind of wrench
while tightening connectors.
Connect your receiver to the antenna
1. Connect the supplied SCART cable between
TV SCART connector on the receiver and
SCART connector on the TV
2. If you want to connect your receiver to a TV
and a VCR at the same time you must use an
additional SCART cable. Connect a SCART
cable between the VCR and the SCART
connector marked AUX (on the receiver).
Note Note : If degraded picture quality is observed
while viewing copy-protected PPV
programmes, connect the receiver directly
to the television. Do not connect through
VCR.
Standard-definition connection (SCART)