33
Bas
ics
PCS Service Features
Call Waiting
To respond to an incoming call while you’re on a call:
1.
The screen displays the incoming call and a tone is
heard. Press
to accept the call and place your
existing call on hold.
2.
To switch between callers, press
.
3.
When finished, you can press
.
Note:
If you press END with a caller on hold, the current call is
disconnected and the phone rings again to allow you to connect to
the call that was on hold.
Call Forwarding
Lets you forward your calls to another number. You can
still make calls from your phone while this is activated.
There is a per call charge for this service.
To activate:
1.
Press .
2.
Enter the area code and phone number.
3.
Press
. A tone is heard that confirms the activation
of Call Forwarding.
Summary of Contents for VGA1000
