25
Bas
ics
Making and Answering Calls
Making Calls
1.
Make sure your phone is on.
2.
Enter a phone number. If you make a mistake while
dialing, press
to erase one digit at a time or press
and hold
to erase the entire number.
3.
Press
to place the call.
4.
When you’re finished, close the flip or press
.
Answering Calls
1.
Make sure your phone is ON. (If your phone is OFF,
incoming calls go to voicemail.)
2.
When your phone rings or vibrates, answer the call by
pressing
. (Depending on your settings, you may
also answer a call by opening the flip or by pressing
any key.)
3.
To end the call, close the flip or press
.
Signal Strength
Call quality is always best when the antenna is fully
raised. If you’re inside a building, being near a window
may give you better reception. You can see the strength
of your signal by the signal indicator (
) on your
phone’s display screen.
Summary of Contents for VGA1000
