L
Handling of r
obotic vacuum
cleaner
installation
32
When the bottom surface to be cleaned is rough or frequent wall surface
cleaning is conducted, the side rotating brush can be bent or scattered.
If side rotating brush becomes bent or dirty,
take the following measures.
Always turn off the emergency switch at the bottom
of main frame before handling.
■
Handling method of side rotating brush
1
2
4
3
Confirm whether the side rotating brush becomes bent or
foreign materials are adhered.
Wear rubber glove, and after wrapping the side rotating
brush with steam towel etc. for about 10 seconds, wipe
them away.
When large amount of hair, thread, etc. are clung to the
gap between the main frame and side rotating brush,
remove them by separating the side rotating brush with (+)
driver. When re-assembling, conduct the assembling after
confirming the “L” mark inscribed at the side rotating brush
and the “L” mark of the main frame bottom.
(R mark has been inscribed for the right side of the brush.)
Perform the wiping with the same method as that of the
No. 2 above while rotating the side rotating brush.
As foreign material like hair can easily be adhered to the
side rotating brush, remove them frequently. If large
amount of foreign materials are being caught there, there
is the worry of damaging the side rotating brush.
