background image

Carrying handle

The cleaner can also be moved by
using the carrying handle.

Cleaning lightweight

flexible rugs

Stand on one end of rug and move
cleaner toward other end or edge.
Before reaching edge, push down on
handle. This will lift up the nozzle(front
of cleaner)and will prevent rug from
clinging to cleaner.
Continue to lift front of cleaner so that
when you have reached the edge, it is
completely off the rug. Move cleaner
back to start again, lower front of
cleaner, and use only forward strokes.

Cleaning Tool attachments

Attachment tools can be used to clean
furniture or drapes, on stairs or in
corners. Place the vacuum on the floor
with the handle in the upright  position. 

while using attachment tools. Do not place
the vacuum on top of furniture or steps as
the brushroller may cause damage.

A. Combination tool:
Two types of cleaning tools are
included in one attachment: rotate for
desired tool.

·

Use brush side to dust furniture,

blinds, books, lamps, shelves.

·

Use upholstery side for curtains, 

draperies, cushions, fabrics.

B. Crevice tool:
Use in corners, on stairs, baseboards,
and behind furniture.

C. Extension Wand:
Use with desired attachments and
narrow wand for a longer reach.

2-4

Carpet height adjustment

Carpet and rug cleaning takes place at
the nozzle (A).

When it is necessary to raise and lower
the nozzle for various carpet pile
heights, rotate the nozzle control knob
(B) to the desired setting.

2-7

2-8

2-8

2-6

2-5

A

B

C

For maximum cleaning performance,
The following carpet height settings are
recommended:

·

Lowest setting: for all types of carpet

·

Higher settings: for very deep pile

carpet where easier pushing effort is
desired, while maintaining good
cleaning performance.

Note: If the cleaner is difficult to push,
rotate knob to the next higher setting.

3. Maintenance

Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure continued
cleaning effectiveness.

Check the dust bag from time to time.  Change the dust bag when dirt reaches the dotted line.  If more dirt than this
accumulates, your cleaner will not operate effectively.

Note: All new carpet has loose fibers which can fill the bag quickly while vacuuming.

When to replace the Dust bag

4

Summary of Contents for VAU-5863












Reviews: